iEM2055 direct single phase energy meter – 230V – 45A – Modbus – MID

The energy meters in the Acti9 iEM2055 series are DIN rail-mounted, single-phase energy meters designed for simple metering. This product series is useful for managing electrical installations for building management as well as monitoring power consumption for each sector, unit, or workshop. It has a red LED indicator and an 8-character LCD display to show the measured electrical parameters. The meter will measure Active and Reactive Power, Active and Reactive Energy, Voltage, and Current with Class 1 active energy accuracy in accordance with IEC 62053-21 standard. With a supply voltage range of 96 to 276 VAC at 50Hz or 60Hz, it is appropriate for a 230VAC network. Direct connect current measurement in single phase and neutral setup up to 63A with only 32 samples per cycle. Modbus RTU is the communication protocol; it supports three wire terminals and has no other communication ports. A dedicated input for switching between two tariffs will allow you to do just that. The product has the following measurements: height 90 mm, breadth 36 mm, depth 64 mm, and weight 175 g. This version complies with the Measuring Instruments Directive (MID) standard EN 50470-3 class B. able to benefit from the Internet of Things digital power installation when combined with power management software.