iEM2435 direct single phase energy meter – 230V – 100A – M-bus

The energy meters in the Acti9 iEM2435 series are DIN rail-mounted, single-phase energy meters designed for simple metering. This product series is useful for managing electrical installations for building management as well as monitoring power consumption for each sector, unit, or workshop. It has a red LED indication to show measured electrical characteristics, along with a display with seven characters or digits. The meter will measure Active and Reactive Power, Active and Reactive Energy, Voltage, and Current with Class 1 active energy accuracy in accordance with IEC 62053-21 standard. With a supply voltage range of 96 to 276 VAC at 50Hz or 60Hz, it is appropriate for a 230VAC network. Direct connect current measurement in single phase and neutral setup up to 100A with only 32 samples per cycle. There are no extra communication ports; M-Bus is the communication protocol, and 2-wire terminals are supported. It will be possible for you to move between two tariffs using the communication bus. The product has the following measurements: height 96.71 mm, width 35.8 mm, depth 63 mm, and weight 220 g. This version complies with the Measuring Instruments Directive (MID) standard EN 50470-3 class B. able to benefit from the Internet of Things digital power installation when combined with power management software.