Acti9 PowerTag Link Display – color display – DIN rail

Short description

Acti9 PowerTag Link Display – color display – DIN rail

Schneider Electric
Product name
Acti9 PowerTag Display
Device application
Human-machine dialogue application
Mounting mode
DIN rail
Price Range
Amount (pcs)Price
1+0.00 €
5+0.00 €
10+0.00 €


The PowerTag Link Display is the wireless local HMI of the PowerTag System. Thanks to this device combined with the PowerTag Link gateway, you can monitor your energy locally into any electrical distribution system. Indeed, it will display on the front door of your electrical panel the values collected by wireless energy sensors. Such as measured current, voltage, power factor, power and energy. The display can be installed on a DIN rail, clipped-on by its power supply, or as said flush mounted on the front door. To go further, the PowerTag Link Display gives alarms locally. Therefore, it helps to improve your operational efficiency, and to reduce the impact of downtime. The power supply can be supplied with a 110 to 277 VAC, and will distribute 24 VDC to the display. The measured values are 72 mm in width, 95 mm in height, 68 mm in depth for a total weight of 137 g. Device is complient with Electromagnetic and Radio Spectrum Matters standards EN 300 328, EN 301489-1 and EN 301489-17.


Device short name
PowerTag Display
Product or component type
Range compatibility
Acti9 PowerTag Link concentrator
Range of product
Rated supply voltage [Us]
110...277 V AC
24 V DC
Dark grey (RAL 7016)
Display resolution
320 x 240 pixels QVGA
Display type
Complementary Height
95 mm
Information displayed
Active power
Power factor
Energy consumption
Net weight
137 g
Complementary Width
72 mm
Ambient air temperature for operation
-25...60 °C
Ambient air temperature for storage
-40...85 °C
IP degree of protection
IP41 conforming to IEC 60529 (on flush mounting)
Net weight
137 g
Operating altitude
< 2000 m
Relative humidity
5...95 % at 45 °C