Energy sensor PowerTag 63A 1P+N top position of the breaker or switch

PowerLogic PowerTag Energy M63 1P+N Top is a wireless communication energy sensor. It is intended for Schneider Electric’s range Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. Might be compatible with other producers (e.g ABB, EATON, Legrand, Schrack, ETI etc.). It has to be associated with a concentrator or a gateway to provide circuit monitoring and diagnosis down to load level. It is made especially for Energy Management, Energy Efficiency, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. Class performance fits under Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the top of the protective device. The product color is white (RAL9003). The weight is 17,5g. Dedicated wireless Zigbee concentrator is necessary do conclude energy monitoring solution. Wireless PowerTag display A9XMWRD is optional.