Energy sensor PowerTag Flex 63A 3P+N top or bottom position of the breaker or switch

PowerLogic PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, It is intended for 3P+N devices, rating less than or equal 63A. This Flex verison of PowerTag is 100% compatible with any other producers like ABB, SIEMENS, EATON, Legrand, Schrack, ETI etc. as it can be placed on cables. It has to be associated with a concentrator or a gateway to provide circuit monitoring and diagnosis down to load level. It is made especially for Energy Management, Energy Efficiency, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. Class performance fits under Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage are Phase-to-neutral 220VAC to 240VAC +/- 20% and Phase-to-phase 380VAC to 415VAC +/- 20%. The maximum consumption is below or equal to 2VA. It may be installed either on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 40g. Dedicated wireless Zigbee concentrator is necessary do conclude energy monitoring solution. Wireless PowerTag display A9XMWRD is optional.